How to clean vehicle's gearbox

1.Clean and check the liquid level of the automatic gearbox. If necessary, find the cooling pipe of the automatic gearbox, determine the appropriate disassembly position, disassemble any cooling pipe, find the appropriate adapter, connect the adapter with both ends of the disconnected cooling pipe, connect the equipment and the adapter, the two hoses are interchangeable, regardless of oil inlet and return, and connect the equipment power supply, Red is positive and black is negative..

2.Start the engine, turn on the power switch of the equipment, automatically enter the circulation state, check whether the connecting pipeline leaks oil, pull out the oil dipstick, turn on the high-efficiency automatic gearbox cleaning agent, add it into the automatic transmission through a clean funnel, install the oil dipstick, change the gear for cleaning, about 10-20 minutes, about 2-3 minutes for each gear.

3.Then there is the liquid change protection. Add enough new automatic transmission oil to the detection and maintenance equipment of the automatic gearbox system, which should be about 1 liter more than the oil required by the vehicle. Connect the waste liquid discharge pipe to the equipment, prepare the waste liquid collector, and press the equipment liquid change button to change the liquid after cleaning. The waste liquid gradually changes from turbidity to clarity, After the fluid change, the equipment will automatically enter the circulation state and shut down the engine.