Small Appliance Gearbox lubrication

When selecting grease according to the bearing load of Small Appliance Gearbox, grease with small needle penetration should be selected for heavy load. In addition to the small needle penetration in the pressure work, but also have more oil film strength and pressure function. When selecting grease according to the environmental premise, calcium based grease is not easily soluble in water and is suitable for dry and less moisture environment. When choosing grease according to the working temperature, the main indicators should be dropping point, oxidation stability and low temperature function. The dropping point can generally be used to evaluate the temperature function. The actual working temperature of the bearing should be 10-20℃ lower than the dropping point. The operating temperature of synthetic grease should be 20-30℃ below the drop point. 

The improper lubrication of Small Appliance Gearbox is also an aspect of poor lubrication. The splash lubrication mode is mainly used for the occasion of speed. For this medium load, low speed is obviously not appropriate. Long life, less maintenance of closed full life gear box, boiler feed gear box, gear chain continuously transmission, Small Appliance Gearbox lubrication, can also be used for centralized grease supply equipment lubrication. 

The unreasonable lubrication mode of the Small Appliance Gearbox and the defects in the structural design will lead to the unreliability of the Small Appliance Gearbox in the application. Reflected problems, first the service life is reduced, followed by sound and vibration, resulting in frequent maintenance. Therefore, we must do a good job of Small Appliance Gearbox lubrication work, the product can run normally, product quality.